Service Hotline
+86-20-34791069
Knowledge
Home > Knowledge > Content

Product Categories

Floor Insulation Moisture, shock, heat conduction

Currently on the market are common in the floor of these:

1, solid wood flooring: also known as wood flooring, is processed directly into the floor with solid wood. It has a natural growth of wood texture, is a bad conductor of hot, can play the role of Dongnuanxialiang, foot comfort, the use of safe features, is the bedroom, living room, study and other ground decoration of the ideal material. Solid wood decoration style back to nature, texture, natural,

Floor Insulation in the forest coverage rate, and vigorously promote environmental protection today, solid wood flooring is even more precious. Solid wood floor AA grade, A grade, B grade three grades, AA grade the highest quality.

1, pavement should be paved before the floor mats, the thickness of 2 to 3 mm is appropriate. The role of moisture, shock absorption, thermal conductivity, insulation, anti-aging, while the cement floor to make up for the uneven.

2, starting from a corner of the house, from left to right shop, so that the side of the slot toward the room.

3, the next board flat, inclined toward the first board to push. Continue to use the same way to the entire first row of finished.

4, the first row of the last piece of the board according to the length of the required saw,

Floor Insulation with the rest of the beginning of the second row of cloth. The seams of each row are offset by at least 500 mm from the seams of the previous row.

5, the slat slanting toward the front of the slab push. Be careful to push down at the same time, with a percussion block gently tapping.

6, in the paved the first plate of the horizontal end into a wedge.

7, in the second plate of the horizontal side of the oblique press into, put down the longitudinal side.

8, and then slowly push down the slips at the same time, pull out the wedge and gently hit the stick with the percussion block.

9, after laying the three rows to adjust the distance between the floor and the wall. Grap the wedge between the floor and the wall.

10, the first row of the floor to adapt to the walls of the wall distorted. Draw the wall on the board. And then grab the first row of the vertical end of the floor to pull up,

Floor Insulation while gently tapping at the interface, the first row out to carry out the required sawing.

11, put the sawn floor of the bar from left to right back. First inclined to push into the horizontal end, then push the longitudinal side. Add wedges between the floor and the wall.

12, such as pavement environment with a heating tube, to punch on the board, the hole at least 20 mm larger than the diameter of the tube, the board when the sawing of the piece of stained with holes covered with a ring cover.

13, if you cut the rim for a door,

Floor Insulation use a slat to measure it to ensure a high degree of fit.

14, laying the last row, the first need to cut the width of the required. Put the last piece on the penultimate block, facing the wall about 5 mm. Use a piece of wood without a lock bar to measure the line to be saw. Put a good piece of board put a piece of up.

15, installed on the baseboard, but should not press down to the degree of floor lock. Can be installed in a room to another room at the transitional location of the flat or trim side.


Feedback
Send
Contact Us
Address: Landy Industrial Park, No 215, Shinan Road, Shipai Section, Dongchong Town, Nansha District, Guangzhou, Guangdong, China
Tel: +86-20-34791069
Fax: 86-20-34791086
E-mail: landy@landydu.com.cn
Copyright © Landy (Guangzhou) Plastic Products Co.,Ltd All Rights Reserved.